Z3 ARGB FAN - MONTECH
Z3 ARGB FAN
ARGB Lighting
White ARGB Fan *3
Controller
Remote Controller
Without VDG cable
Axial lighting effect
Unlike the black axis of a typical RGB fan, the Z3 ARGB fan axis can sync with the fan frame to convert RGB lighting effects.
Dual ring design
The dual ring lighting effect design makes the outstanding visual performance.
High Compatibility controller
The Z3 controller can add up to ARGB FAN*6 and LED strips.
You can change the lighting modes through the remote controller(included)/ Led (Reset) button on front panel / Motherboard ( 5V3PIN)
1 2 3 4 5 | on/off Switch forward mode Switch back mode Accelerate Decelerate | 6 7 8 9
| Increase lighting Reduce lighting Auto play mode White、Red、 Green、Blue lighting
| |
10 | Press the lock button on remote controller 5 times continuously, the roduct LED will flash white once. At the meanwhile, the product can only be controlled by this remote controller, and other remote controllers are invalid. To valid other remote controllers, press the button 5 times on any remote controller. The product flashes white again. At the meanwhile, the lock is unlocked and any remote controller can control the product. | |||
Motherboard synchronization
Compatible with Asus, Gigabyte, MSI, and SRock motherboards
For motherboard sync, it can only work with 5V3PIN.
It will NOT work with old motherboard 4-pin RGB or Standard RGB+12V.
Efficient heat dissipationWith the fan speed of 1200 RPM and the low noise operational design of 25 dBA, making Z3 functional and quiet. |
Anti-Vibration
Pre-installed anti-vibration rubber pads can prevent the conflict between fan frame and the case and can effectively absorb vibration and reduce
Specifications
Product Name | Z3 ARGB |
Color | White |
Size | 120*120*25mm |
Speed | 1200 RPM ± 10% |
Noise | A25dBA |
Air Volume | 30 CFM |
Voltage | DC 12V |
Rated Power | 3W ± 10% |
Interface | 3pin/4pin |
Content | ARGB Fan*3 Controller*1 ARGB remote controller*1 |
Zalo
Messenger
